Rockwell-automation SA3100 Distributed Power System Drv Config,Program Manuale Utente Scaricare il pdf (Pagina 82)

3-44

SA3100 Drive Configuration and Programming

Interlock Register (Continued) 205/1205

MCR Did Not Close Bit 7

The MCR Did Not Close bit is set if the

optional output contactor did not close when

commanded to do so.

Hex Value: 0080H

Sug. Var. Name: IC_MCR@

Access: Read only

UDC Error Code: N/A

LED: N/A

Bit 8

Reserved for future use.

Hex Value: 0100H

Sug. Var. Name:

Access: Read only

UDC Error Code: N/A

LED: N/A

Bit 9

Reserved for future use.

Hex Value: 0200H

Sug. Var. Name:

Access: Read only

UDC Error Code: N/A

LED: N/A

Incompatible Resolver Bit 10

The Incompatible Resolver bit is set if

Resolver & Drive I/O boards B/M 60001 or

B/M 60001-1 are detected in the PMI

Regulator.

Hex Value: 0400H

Sug. Var. Name: IC_IRES@

Access: Read only

UDC Error Code: N/A

LED: N/A

DC Bus Voltage (Volts) Register 206/1206

The DC Bus Voltage (Volts) register contains the voltage of the DC

bus. It is scaled in units of volts.

Sug. Var. Name: BUS_VDC%

Units: Volts

Range: N/A

Access: Read only

DC Bus Current (Amps) Register 207/1207

The DC Bus Current (Amps) register contains the measured current

in the DC bus. The value is scaled in amps times 10. For example,

50.1 amps would be represented as 501.

Sug. Var. Name: BUS_IDC%

Units: Amps ∗ 10

Range: N/A

Access: Read only

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 161 162

Commenti su questo manuale

Nessun commento

Rockwell-automation SA3100 Distributed Power System Drv Config,Program Manuale Utente Pagina 82

Commenti su questo manuale

Prodotti e manuali riguardandi Apparecchiature Rockwell-automation SA3100 Distributed Power System Drv Config,Program