Rockwell-automation 842E CM Integrated Motion Encoder on EtherNet/IP Manuale Utente Scaricare il pdf (Pagina 53)

Rockwell Automation Publication 842E-UM002A-EN-P - November 2013 53

Appendix A

Flash Update the 842E-CM Firmware

Introduction

This appendix explains how to flash update new firmware for the 842E-

CM product. To download the latest firmware for the 842E-CM, copy the

following link in your Internet browser, and click on the Go icon:

http://www.rockwellautomation.com/rockwellautomation/support/

firmware/overview.page

If the firmware version is not stated on the label, visit the Rockwell

Knowledgebase

and search for “842E-CM Firmware Update Procedure” to

look up the appropriate firmware update method.

Performing the Update

If firmware revision 1.002 (or higher) is stated on the encoder label,

proceed to update the firmware.

1. First, verify successful RSLinx Classic communications with the

842E-CM encoder via EtherNet/IP using RSWho Ethernet or

EtherNet/IP driver.

IMPORTANT

Check the 842E-CM encoder label before flashing

firmware. If the label indicates FW:1.002 (or higher), use

the following procedure to update the firmware.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 63 64

Nessun commento

Rockwell-automation 842E CM Integrated Motion Encoder on EtherNet/IP Manuale Utente Pagina 53