Rockwell-automation 1785-ENET USER MANUAL PLC-5 ETHERNET INTERFACE Manuale Utente Scaricare il pdf (Pagina 19)

1785-6.5.19 November 1998

Installing the Interface Module 2-3

3. Locate and record the Ethernet hardware address.

Allen-Bradley assigns each PLC-5 Ethernet interface module an

Ethernet hardware address at the factory. Look for this

address either:

• in the back, upper corner of your module

• in the channel 3A configuration screen of your PLC-5

programming software

Necessary Equipment Locate and have ready all the tools and equipment necessary

for installation:

19915

Ethernet

hardware

address label

I/O Chassis

(1771-A1B/B, -A2B/B, -A3/B or -A4B/B)

Any external or internal

Allen-Bradley power supply

ESD

Grounding

Wrist Strap

phillips

screwdriver

PLC-5 Processor

Supported processors and current firmware

(see page 2-1)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 53 54

Nessun commento

Rockwell-automation 1785-ENET USER MANUAL PLC-5 ETHERNET INTERFACE Manuale Utente Pagina 19