Rockwell-automation 4100 ESRS Encoder Signal Reference Simulator Insta Manuale Utente Scaricare il pdf (Pagina 16)

Publication 4100-IN505A-EN-P - October 2000

1-4 Overview

ESRS Principal

Specifications

Mechanical Specifications

Environmental Specifications

Power Supply and Fuses

Power Supply Specifications

Table 1.A Mechanical Specifications

Enclosure Type Steel case with integral mounting feet on rear edge.

Enclosure Size English (inch)

11.6 x 13.5 x 1.7

Metric (mm)

295 x 343 x 43

Table 1.B Environmental Specifications

Operating Storage

Temperature

0 to 60

C -40 to 70

Humidity

95% non condensing @ 60

Table 1.C Power Specifications

Input Voltage +5 or +12V DC. Both ± 5%

Current Draw Approximately 0.6A DC

Overcurrent Protection Overcurrent protection is provided by

separate +5V (F102) and +12V (F103) PCB

mounted fuses rated at T1.6A. A spare

fuse (F101) is also provided on the PCB.

If +5V and +12V are applied

simultaneously, the ESRS selects

the +12V input.

The ESRS is intended to take its

power from the encoder supply of

the target equipment. However, the

user should establish that this

supply has sufficient capacity to

provide the current indicated above.

If necessary, an additional power

supply is required – see Chapter 2:

Installation.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 36 37

Nessun commento

Rockwell-automation 4100 ESRS Encoder Signal Reference Simulator Insta Manuale Utente Pagina 16