Rockwell-automation 1762-IQ8OW6 DC-Input/Relay-Output Combination Modu Manuale Utente Scaricare il pdf (Pagina 7)

DC-Input/Relay-Output Combination Module 7

Publication 1762-IN018B-EN-P - July 2013

Mount the Module on a Panel

Use the dimensional template shown below to mount the module. The preferred mounting

method is to use two M4 or #8 panhead screws per module. M3.5 or #6 panhead screws may also

be used, but a washer may be needed to ensure a good ground contact. Mounting screws are

required on every module.

TIP

For environments with greater vibration and shock concerns, use the panel

mounting method described below, instead of DIN-rail mounting.

End Anchor

MicroLogix 1200

Controller

MicroLogix 1200

Expansion I/O

MicroLogix 1200

Expansion I/O

MicroLogix 1200

Expansion I/O

(3.54)

100

(3.94)

40.4

(1.59)

40.4

(1.59)

14.5

(0.57)

For more than two modules: (number of modules - 1) x 40 mm (1.58 in.)

NOTE: All dimensions are in mm (inches). Hole spacing tolerance: ±0.4 mm (0.016 in.).

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Nessun commento

Rockwell-automation 1762-IQ8OW6 DC-Input/Relay-Output Combination Modu Manuale Utente Pagina 7