Rockwell-automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardP Manuale Utente Scaricare il pdf (Pagina 111)

Publication 1753-PM001A-EN-P - November 2005

Configure the GuardPLC OPC Server B-5

5. Choose the Outputs tab. Drag DI1 from the Signal Editor to the

Outputs section of the OPC Signal Connections window.

6. Close the OPC Signal Connections window and the OPC-Server

Resources Editor.

7. Completely expand the G16OPC01 tree. Right-click

[1] DI 20 and choose Connect Signals.

8. Drag DI1 from the Signal Editor to DI[01].Value Signal field.

9. Close the DI1 Signal Connections window.

10. Right-click [2] DO 8 and choose Connect Signals.

11. Choose the Outputs tab.

TIP

Input and Output are identified from the

controller’s perspective. Therefore, output

means signals sent out from the GuardPLC

1600 controller and input means signals sent in

to the GuardPLC 1600 controller.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 121 122

Nessun commento

Rockwell-automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardP Manuale Utente Pagina 111