Rockwell-automation 1746-NI8 SLC 500 Analog Input Modules User Manual Manuale Utente Scaricare il pdf (Pagina 18)

2–4

Quick Start

Publication

17466.8 - April 1997

Configure the system.

Reference

Configure your system I/O for the particular slot the 1746NI8 is in (slot 1 in this example). Enter the

module ID code. The ID code is 3526 for Class 1 interface, and 12726 for Class 3 interface. See

chapter 4 for more information on Class 1 and Class 3 interfaces.

Important: All programming software does not support configuration for Class 3 operation.

• Advanced Programming Software (APS) supports Class 3 configuration. After entering the ID

code (12726), enter 16 input words and 12 output words.

• SLC 500 A.I. Seriest Programming Software supports Class 3 configuration. After entering the

ID code (12726), enter 16 input words and 12 output words.

• RSLogix 500t, version 1.30 or later, supports Class 3 configuration. After entering the ID code

(12726), select Class 3 operation.

• Earlier versions of RSLogix 500 will only support configuration for Class 1 operation. Contact

Rockwell Software for information on upgrading your software.

If you are converting from a 1746NI4 to a 1746NI8 based system, see Appendix C.

Chapter 4

(Preliminary

Operating

Considerations)

Appendix C

(Converting from

1746NI4 to

1746NI8)

Your programming

device's user

manual.

Determine the operating parameters.

Reference

Determine the operating parameters for channel 0. This example shows the channel 0 configuration

word. The module is in slot 1. The default configuration word is all zero's.

Chapter 4

(Preliminary

Operating

Considerations)

Chapter 5

(Channel

Configuration,

Data, and Status)

Appendix B

(NI8 Configuration

Worksheet)

Appendix C

(Converting from

1746NI4 to

1746NI8)

• Input Type:

±10V dc

• Data Format:

engineering units

• Open Circuit: only used

for 4-20 mA input type

• Filter Frequency:

20 Hz

• Channel Enable:

enabled

• Not Used

Channel 0

1112131415

0000

910 8 67450123

Bit Number

1011 00000000

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 90 91

Commenti su questo manuale

Nessun commento

Rockwell-automation 1746-NI8 SLC 500 Analog Input Modules User Manual Manuale Utente Pagina 18

Commenti su questo manuale

Prodotti e manuali riguardandi Apparecchiature Rockwell-automation 1746-NI8 SLC 500 Analog Input Modules User Manual