Rockwell-automation AADvance Controller System Build Manuale Utente Scaricare il pdf (Pagina 34)

2-4

Document: 553632

(ICSTT-RM448_EN_P) Issue: 08:

System Build Manual (AADvance Controller)

Free Space Around the Controller

Free Space Around the ControllerFree Space Around the Controller

Free Space Around the Controller

The controller requires a free space at least 140mm deep (from front to back)

between the rear panel of an enclosure and the inside of an enclosure door. If you

wish to mount the controller on DIN rails, increase this allowance by the additional

depth of the DIN rails.

You must allow sufficient free space around the base units. Every application needs

space on at least three sides, as follows:

 Space above, to manipulate and install field wiring

 Space below, to enable modules to fit and to be able to grasp a module during

removal

 Space to the right, to move an I/O base unit during assembly or in the event of

installing a new base unit

If an expansion cable is to connect to the left-most base unit, the controller also needs

space to the left, to fit the expansion cable adapter.

This illustration shows the minimum recommended clearances for a flat panel or DIN

rail mounting.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 129 130

Nessun commento

Rockwell-automation AADvance Controller System Build Manuale Utente Pagina 34