Rockwell-automation 284E ArmorStart EtherNet IP Communications and Con Manuale Utente Scaricare il pdf (Pagina 79)

Rockwell Automation Publication 280E-PM001A-EN-P – August 2011 79

ArmorStart

EtherNet/IP

™

Communications & Control Programming Manual Appendix B

Using the ArmorStart

Internal Web Server

Rockwell Automation provides an internal embedded web server with each

ArmorStart Ethernet/IP. The internal web server allows you to view information

and configure the ArmorStart via a web browser. The internal web server can be

used to set up the ArmorStart IP address by performing the following this steps:

1. Open your preferred internet web browser.

2. Enter the IP address of the desired ArmorStart. In this case we'll use

192.168.1.1.

Note: 192.168.1.1 is not the factory default IP address.

3. The web server shown below should appear in your web browser.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 89 90

Nessun commento

Rockwell-automation 284E ArmorStart EtherNet IP Communications and Con Manuale Utente Pagina 79