Rockwell-automation 20D-DL2-ENETO DriveLogix 5730 Controller Embedded Manuale Utente Scaricare il pdf (Pagina 6)

6 Embedded EtherNet/IP Option Card for DriveLogix™5730 Controllers

Step 6: Installing the

Embedded EtherNet/IP

Option Board

Step 7: Replacing the

Covers and Control

Cassette

The procedure for replacing the covers and control cassette is the reverse of

removing these components. Refer to Step 4: Removing the Inside Cover

from the Control Cassette on page 5, Step 3: Removing the Control Cassette

from Drive on page 4 and Step 2: Opening Door Over Power Structure and

Main Control Board on page 4.

Step 8: Configuring

EtherNet/IP Communication

Referring to publication 20D-UM003… , User Manual - DriveLogix5730

Controller, configure the EtherNet/IP port on the option card.

Task Description

Install and tighten standoffs (7 to 10 lb.-in.)

Align connector on Embedded EtherNet/IP Option

Board with connector on Main Control Board

Place Embedded EtherNet/IP Option Board on the

Main Control Board

Install and tighten screws (7 to 10 lb.-in.)

1 2 3 4 5 6 7 8

Nessun commento

Rockwell-automation 20D-DL2-ENETO DriveLogix 5730 Controller Embedded Manuale Utente Pagina 6