Rockwell-automation 2097-PGMR Memory Module Programmer Quick Start Manuale Utente Scaricare il pdf (Pagina 5)

Bulletin 2097 Memory Module Programmer 5

Publication 2097-QS001D-EN-P - November 2011

Operation with External Power Supply

You can operate the memory module programmer with a customer-supplied external power

supply. Refer to Specifications

on page 15 for power supply requirements.

To use the memory module programmer with your external power supply, the power supply

requires an extra-low voltage plug with the following dimensions.

ATTENTION: The memory module programmer contains electrostatic discharge (ESD) sensitive

parts and assemblies. You are required to follow static-control precautions when you use it. If you

do not follow ESD control procedures, components can be damaged. If you are not familiar with

static control procedures, refer to Guarding Against Electrostatic Damage, publication 8000-4.5.2

or any other applicable ESD awareness handbook.

TIP

You can remedy occasional memory module programmer anomalies by turning it off and on.

+6V DC

–

9.5

(0.37)

5.5

(0.22)

2.1

(0.08)

Dimensions are in mm (in.).

CAT. NO. 2097-PGMR

For detailed information

refer to instruction

manual

HW/SW REV:1A 10

SN: 2097-PGMR012345678

6V DC 150 mA min

Power Supply

(FRIWO 7207/06 1.0791 MPP15)

External Power Supply Connector

1 2 3 4 5 6 7 8 9 10 ... 15 16

Nessun commento

Rockwell-automation 2097-PGMR Memory Module Programmer Quick Start Manuale Utente Pagina 5