Rockwell-automation 1793-IV16 Flex Integra Input Module Install Inst Manuale Utente Scaricare il pdf (Pagina 4)

4 FLEX Integra 16 Source Input Module

Publication 1793-5.10 - December 1999

Wiring

This module is available with 2 styles of terminations: 1793-IV16 -

screw-cage and 1793-IV16S - spring-clamp. Refer to the wiring figure

below.

1. Connect individual sensor signal input leads to terminals 0 through 15

on row A (channels 0 thru 15 respectively).

2. Connect the associated sensor common lead to a COM terminal on

row (B).

3. Connect +24V dc voltage to V terminal on row B.

4. Connect 24V dc common to terminal COM on row A.

5. If daisy-chaining +24V dc from this module to the next Integra

module, connect a jumper from terminal V to terminal 8 on the next 8

point Integra module or terminal V on the next 16 point Integra

module.

6. If daisy-chaining 24V dc common from this module to the next FLEX

Integra module, connect a jumper from terminal COM on this module

to terminal 0 on the next 8 point Integra module, or to terminal COM

on the next 16 point Integra module.

ATTENTION: Total current draw through the module’s

(V) voltage terminals is limited to 10A. Separate power

connections to the module may be required.

0 12345 6789101112131415

41815

COM

1793-IV16S

01 23 45678 9101112131415COM

COM

VVCOM COM

41817

1793-IV16

Where: COM = common, V = +24V dc power, 0 thru 15 = inputs

1 2 3 4 5 6 7 8 9 10 11 12

Nessun commento

Rockwell-automation 1793-IV16 Flex Integra Input Module Install Inst Manuale Utente Pagina 4