Rockwell-automation 1792D-8BVT8CD ArmorBlock MaXum 8 Input/8 Output Mo Manuale Utente Scaricare il pdf (Pagina 4)

4 ArmorBlock MaXum 8 Input / 8 Output Module Series B

Publication 1792D-IN020B-EN-P - September 2000

The module is equipped with AutoBaud detect. AutoBaud lets the module

read the settings already in use on your DeviceNet network and automatically

adjusts to follow those settings.

Install the Module

This module mounts to the following cable bases:

• 1792D-CBFM for KwikLink™ flat media installation

• 1792D-CB12 for 12mm drop cable installation

• 1792D-CB18P for round media DeviceNet and output power

• or other optional cable base assembly.

To install the module:

1. Position the module over the mounted cable base. Align the three

captive screws in the module with the accepting receptacles in the

base.

2. Tighten the screws with a torque of 8 inch-pounds to secure the

module to the base.

IMPORTANT

The cable base should already be installed. See

publication 1792D-IN009B-EN-P to install the cable

base.

IMPORTANT

Proper alignment of the screws is necessary to complete

the connections between the module contacts and the

cable contacts.

1 2 3 4 5 6 7 8 9 ... 15 16

Nessun commento

Rockwell-automation 1792D-8BVT8CD ArmorBlock MaXum 8 Input/8 Output Mo Manuale Utente Pagina 4