Rockwell-automation 1791D-N4CV2X CompactBlock I/O for DeviceNet Expans Manuale Utente Scaricare il pdf (Pagina 5)

CompactBlock I/O Analog Combination Input/Output Expansion Module 5

Publication

1791D-IN002A-EN-P - June 2003

Module Mounting

You can install the CompactBlock module on a panel or DIN rail.

Panel Mounting

1. Place the module against the panel where you want to mount it.

2. Drill holes in the panel that are aligned with mounting holes on the

module.

3. Place screws through each of the 2 mounting holes and tighten the

screws until the module is firmly in place.

WARNING

When used in a Class I, Division 2, hazardous location,

this equipment must be mounted in a suitable

enclosure with proper wiring method that complies

with the governing electrical codes.

Base Module

141 mm

5.55 in

41 mm

1.6 in

41673

1 2 3 4 5 6 7 8 9 10 ... 19 20

Nessun commento

Rockwell-automation 1791D-N4CV2X CompactBlock I/O for DeviceNet Expans Manuale Utente Pagina 5