Rockwell-automation 1756-EN2F ControlLogix EtherNet/IP Module Installa Manuale Utente Scaricare il pdf (Pagina 10)

10 ControlLogix EtherNet/IP Module

Rockwell Automation Publication 1756-IN606B-EN-P - April 2010

To reset the module to its initial out-of-the-box settings, reset the switches to

888 and cycle power.

After cycling power with the switches set to 888, remove the module and set the

switches to their final value. When you set the rotary switches to a value other

than 888, or to the valid IP address values 001…254, the software configuration

determines the IP address.

IMPORTANT

Do not use the 888 switch setting during normal module operation.

Determining the Module IP Address

If BOOTP/DHCP is The module

Enabled Asks for an address from a BOOTP/DHCP server. The server also

assigns other Transport Control Protocol (TCP) parameters.

Not enabled Uses the IP address (along with other TCP configurable parameters)

stored in nonvolatile memory.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Nessun commento

Rockwell-automation 1756-EN2F ControlLogix EtherNet/IP Module Installa Manuale Utente Pagina 10